Book an appointment

Mold Check: Testing House/Condo 2000 sq ft

Mold inspection for all levels of a home up to 2000 sq. ft. Assess for mold contamination using visual inspection, infrared thermal imaging, particle counter and instrument moisture mapping. Collect air and/or surfaces samples for analysis by an accredited lab.

2 Options

Mold Check: Attic Only

This service is recommended when mold is discovered in an attic and you will need a remediation protocol for mold mitigation. Includes inspection and documentation of mold issues. Does not include lab testing which is not necessary except for medical reasons. While your technician may give opinions regarding the cause or source of mold, we recommend hiring an attic specialist for any diagnosis of attic moisture/dampness.

$468 · 2 hours

Mold Check: Testing One Room Only

Assess one room for mold contamination using visual inspection, infrared thermal imaging and instrument moisture mapping. Collect air and/or surfaces samples for lab analysis. Lab fees are included. Fee is for Madison only. Out of the area add $48.

$398 · 1 hour 30 minutes

Mold check: Furnace/AC Only

$368 · 1 hour

Mold Check - Testing Basement Only Homes larger than 2000 sq ft

Assess Basement for mold contamination using visual inspection, infrared thermal imaging and instrument moisture mapping. Collect air and/or surfaces samples for lab analysis. Includes up to 6 lab samples. Additional labs are $58 each.

$568 · 2 hours 30 minutes

Mold Check: Testing Basement Only Homes less than 2,000 sq ft

Assess Basement for mold contamination using visual inspection, infrared thermal imaging and instrument moisture mapping. Collect air and/or surfaces samples for lab analysis. Includes up to 6 lab samples. Additional labs are $58 each.

$468 · 2 hours

Mold Check: Testing House/Condo 3,000 sqft or less

Mold inspection for all levels of a home up to 3000 sq. ft. Assess for mold contamination using visual inspection, infrared thermal imaging, particle counter and instrument moisture mapping. Includes QPCR testing (Mold DNA testing). Collect air and/or surfaces samples for analysis by an accredited lab.

2 Options

Mold Check: Testing House/Condo 4,000 sq. ft. or less

Mold inspection for all levels of a home up to 4000 sq. ft. Assess for mold contamination using visual inspection, infrared thermal imaging, particle counter and instrument moisture mapping. Collect air and/or surfaces samples for analysis by an accredited lab or via Mycometer technology.

2 Options

Mold Check: Testing House/Condo 5,000 sq. ft or less

Mold inspection for all levels of a home up to 5000 sq. ft. Assess for mold contamination using visual inspection, infrared thermal imaging, particle counter and instrument moisture mapping. Includes QPCR testing (MOLD DNA TESTING). Collect air and/or surfaces samples for analysis by an accredited lab, via Instascope, Mycometer and/or spore traps. Crawlspaces/attics are additional.

2 Options

Post Remediation Verification & Testing (PRV)

This service is for clients who have completed mold remediation and wish to verify that mold counts are back to acceptable and safe levels. This includes a visual check, moisture meter measurements and lab testing for fungal mass on surfaces and in the air.

$368 · 2 hours

Mold Check: Commercial Bldg

Include visual assessment, infrared thermal imaging and moisture mapping. We may use mold DNA testing, Mycometer technology, Spore Traps (air sampling), swabs or tape lifts. Lab fees additional. Up to 2,000 sq ft. Call for price quote if > 2000, sq ft.

$650 · 4 hours

COVID-19 Test Kit (to test surfaces - not a medical test)

We use an FDA-approved medical lab for our test. This test can be performed by homeowners, office managers, maintenance personnel or building owners to determine the presence of COVID-19 virus on surfaces. A swab is used to touch surfaces then the swab is sent directly to the lab for analysis. Turn around time is 2-3 days. Price includes postage, collection kit with swab, and lab fees.

$248 · 30 minutes

MOLD DNA - Big 2+

Includes regular shipping to the lab. Overnight shipping add $34.

$130 · 1 hour

MOLD DNA - CAP 14

Includes regular shipping. Overnight shipping add $34.

$188 · 1 hour

Mold Mycotoxins Test

Laboratory test which uses ELISA technology to identify mold mycotoxins in household dust. Especially important for Lyme patients and individuals who have a genetic marker preventing them from properly processing mold toxins. Includes shipping and a 20 mn phone consult to discuss the results.

$328 · 30 minutes

FUNGAL CULTURE

$88 · 1 hour

ERMI Testing

ERMI is a mold DNA test used by mold-literate physicians to establish guidelines for patients occupancy of a residence or work place.

$268 · 1 hour

Air Quality Check - House/Condo - 2000 sq. ft or less

Includes Mold Testing (we may test any of the following, depending on visual inspection and instrument readings: air, carpeting, bedding/mattress, under kitchen sink, furniture surfaces, furnace ducts, supply vents, A/C coil, under bathroom vanity, under bath tub, wall or ceiling cavities, vacuum cleaner dust, furnace filter). Also includes analysis of household dust for allergens and irritants, gas leak check (fireplaces, stove, water heater/, furnace, clothes dryer), carbon monoxide check, carbon dioxide measurements to establish ventilation rate, formaldehyde measurement, furnace and air conditioning check (this is NOT a mechanical inspection, only air quality related items are checked), heating ducts check, vacuum cleaner leakage test, thermal infrared imaging scan of walls and ceilings, and cursory EMF check if there is an interest).

$780 · 4 hours

Air Quality Check - House/Condo - 3,000 sq ft or less

3,000 square feet or less. Includes Mold Testing (we may test any of the following, depending on visual inspection and instrument readings: air, carpeting, bedding/mattress, under kitchen sink, furniture surfaces, furnace ducts, supply vents, A/C coil, under bathroom vanity, wall or ceiling cavities, vacuum cleaner dust, furnace filter). Also includes analysis of household dust for allergens and irritants, gas leak check (fireplaces, stove, water heater/, furnace, clothes dryer), carbon monoxide check, carbon dioxide measurements to establish ventilation rate, formaldehyde measurement, furnace and air conditioning check (this is NOT a mechanical inspection, only air quality related items are checked), heating ducts check, vacuum cleaner leakage test, thermal infrared imaging scan of walls and ceilings, and EMF check).

$980 · 5 hours

Air Quality Check - House/Condo - 4000sq. ft. or less

4,000 square feet or less. Includes Mold Testing (we may test any of the following, depending on visual inspection and instrument readings: air, carpeting, bedding/mattress, under kitchen sink, furniture surfaces, furnace ducts, supply vents, A/C coil, under bathroom vanity, wall or ceiling cavities, vacuum cleaner dust, furnace filter). Also includes analysis of household dust for allergens and irritants, gas leak check (fireplaces, stove, water heater/, furnace, clothes dryer), carbon monoxide check, carbon dioxide measurements to establish ventilation rate, formaldehyde measurement, furnace and air conditioning check (this is NOT a mechanical inspection, only air quality related items are checked), heating ducts check, vacuum cleaner leakage test, thermal infrared imaging scan of walls and ceilings, and a cursory EMF check).

$1,280 · 6 hours

Air Quality Check - House/Condo - 5000 sq. ft or less

5,000 square feet or less. Includes Mold Testing (we may test any of the following, depending on visual inspection and instrument readings: air, carpeting, bedding/mattress, under kitchen sink, furniture surfaces, furnace ducts, supply vents, A/C coil, under bathroom vanity, wall or ceiling cavities, furnace filter). Also includes analysis of household dust for allergens and irritants, gas leak check (fireplaces, stove, water heater/, furnace, clothes dryer), carbon monoxide check, carbon dioxide measurements to establish ventilation rate, formaldehyde measurement, furnace and air conditioning check (this is NOT a mechanical inspection, only air quality related items are checked), heating ducts check, vacuum cleaner leakage test, thermal infrared imaging scan of walls and ceilings, and EMF check).

$1,468 · 6 hours

Air Quality Check - One Room only

Assess air quality and collect air quality parameters with scientific instrumentation in one room or office. Includes infrared camera scanning, moisture mapping, mold testing, Formaldehyde measurement, VOC testing and EMF exposure check. Lab fees included UP TO 3 SAMPLES.

$450 · 2 hours 15 minutes

Air Quality Check Commercial

Up to 5,000 sq ft. Includes check for Formaldehyde, Volatile Organic Compounds, Gases, Carbon Dioxide, Mold DNA testing, other air quality parameters and full report. Lab fees additional.

$850 · 4 hours

Phone Inquiry/Consult - 30 Minutes

To discuss your personal situation and determine what type of testing is indicated. A $30 credit will be issued toward any services or lab testing.

$60 · 30 minutes

Phone Consult - 45 Minutes

Phone Consultation with Martine Davis, BBEC, Certified Building Biologist. Ideal to review test results from other providers or to discuss a home/office issue.

$90 · 45 minutes

Phone Consult - 60 Minutes

Phone Consultation with Martine Davis, BBEC, Certified Building Biologist. Ideal for clients out of the service area. Many environmental issues can be solved over the phone.

$120 · 1 hour

Formaldehyde (Air): Immediate Instrument Reading

This test collects air in specific areas with a Formaldehyde meter. The meter will report the Formaldehyde level real-time for each area. Good for checking individual rooms, whole house, apartment, new car interior, etc.

$240 · 1 hour

Formaldehyde (Surface)

This type of testing allows the homeowner to determine which surface is emitting formaldehyde. If formaldehyde air levels were found elevated, this can pinpoint the exact surface(s) causing the emissions. Good to check laminate flooring, new furniture, newly painted areas, new carpeting, kitchen cabinets, recently varnished items, draperies, new contruction materials, etc. Price is for 5 surfaces. Additional surfaces are $48 each.

$290 · 2 hours

Formaldehyde (Air) Lab Test

For this test, an air sample is collected into an adsorbing tube and submitted to a chemistry lab for analysis via Gas Chromatography. The lab provides a report with the level of formaldehyde contained in the air sample. Turn around time is approx. 5 business days. Include shipping charges to the lab and a brief phone consult to discuss your results.

$288 · 1 hour

EMF assessment residential - First hour

Checks for Electric & Magnetic fields, Stray Voltage (Dirty Electricity), RF (Radio Frequencies or Microwave Radiation) from cell towers, routers and other wireless appliances. current on water pipes and body voltage.

$250 · 1 hour

EMF Assessment Residential - Second Hour

Additional time for EMF instrumentation readings

$95 · 1 hour

EMF Assessment Commercial

Assess EMF exposure to building occupants in various locations. Measurements of Electric fields, Magnetic fields, Radio Frequencies, and Stray Voltage. Includes up to 2 hours. Additional hour $150.

$450 · 2 hours

NEW! SAFE and SOUND Premium RF Meter

Safe Living Technologies Safe and Sound Premium RF Detector 200MHz - 8GHz - Great for detecting WiFi, Cell Towers, Smart Meters, etc. - 2 Year Warranty and FREE SHIPPING!

$159 · 10 minutes

Dave in Madison

Dave has been conducting mold investigations for 8 years. His training and experience also include chemical testing (VOCs and Formaldehyde) and allergen testing. Dave is a certified Mycometer Analyst and a Certified Instascope Technician.

Eric in Tennessee

Eric covers Nashville and Knoxville, TN. His background is in building & construction, masonry, and landscaping. He has been conducting mold, air quality and EMF inspections for 15 years.

Erik in Wisconsin

Erik is passionate about real estate, building construction and home maintenance. His training and experience include mold and odor investigations, air quality assessments and formaldehyde testing. He is a Certified Instascope Technician.

Martine Davis

Martine has been a Certified Building Biologist (BBEC) since 2000. She has inspected over 4,000 homes and buildings. She specializes in health factors.