Book an appointment

Full Service -Hand Wash,Vac, WIndows & Tires, All Glass

Thorough hand wash. Wheel faces and barrels are cleaned using a mild wheel cleaner. Blow-dried with warm, filtered air to prevent potential towel marring. Door jambs cleaned. Light interior dusting. ( heavy interior cleaning is available at an extra charge ) Carpets and floor mats vacuumed. Tires dressed, interior and exterior glass cleaned. Exterior Clay Bar & Spray wax.

$150 · 8 hours

Premium Hand Wash & Wax

CCAD hand-wash using proper and modern techniques to prevent swirls and marring of the finish and application of a very durable wax/sealant (up to 6 months). Wheels and inner barrels cleaned to remove built-up brake dust and dirt. Wheel wells clean Door jambs cleaned Tires dressed using water-based dressing (non-greasy, non-fling). Vacuum interior, Clean glass cleaning, Interior hard surfaces wiped down. Note: Excessively dirty vehicles (mud, tar, sap, bugs, etc) WILL BE EXTRA. Dog Hair Pet Staining and Heavy Staining will be at additional cost. * THIS PROCESS CAN TAKE UP TO 7 TO 8 HOURS *

250.00 $250 · 8 hours

Multi-Stage Paint Correction

When you step up to the realm of multi-stage paint correction, you’re significantly improving the finish by removing all of the swirls, and all but the heaviest of scratches and defects. The photo examples above (before and after images) are of the multi-stage process and as you can see, the transformation is significant. This process starts with a heavy compounding machine polishing stage to remove the defects and then followed by a secondary polishing stage to refine the finish and increase gloss and clarity. Given the differences in paint types, condition, and size of vehicles, the rate for the Multi-Stage Paint Correction varies, but we will consult with each vehicle owner to provide a more precise pricing structure. The paint type and condition will also dictate the level of correction, but typically this process on most cars will get rid of 85-95% of all defects. And at this level of correction, you’re getting very close to that of a brand new vehicle without the expense of a re-paint! THIS PROCESS WILL TAKE 48 TO 72 HOURS

$1,450 · 8 hours

Ceramic Coatings

The Formula durability is directly related to the number of layers applied. Notes Gyeon Q2 Mohs will last up to 24 months with 3 very hard coatings. This coating leaves a tremendous gloss and a strong chemical resistance. This is the ultimate daily driver solution. Gyeon Q2 DuraBead lasts for 24 months and is very similar to Mohs, but provides tighter water beading characteristics. Kamikaze Enrei Coat lasts anywhere from 24-36 months with 2 hard coatings. These coatings leave the surface of your paint with stunning looks and hydrophobic properties. THIS PROCESS WILL TAKE 24 TO 48 HOURS

$700 · 8 hours

Wheel Ceramic Coating

Good Package: Ceramic Coating Formula Durability is related to the number of layers applied. Notes Gyeon Q2 Rim can last up to twelve months! Installation includes completely removing wheels from the car, a deep clean, and then coating the faces and inner barrels. We will also coat finished/painted brake calipers for easy brake dust removal! Better Package: Wheel Ceramic Coating Formula Durability is related to the number of layers applied. Notes Gyeon Q2 Rim can last up to twenty-four months! Installation includes completely removing wheels from the car, a deep clean, and then coating the faces and inner barrels with a thicker coating. This allows for better preservation of the protective layer. Best Package: Ceramic Coating Formula Durability is related to the number of layers applied. Notes Gyeon Q2 Rim can last up to twenty-four months! Installation includes completely removing wheels from the car, a deep clean, and then coating the faces and inner barrels. The ultimate in hard-coating wheel protection and chemical resistance. Three coats are applied to the surface and the option to cure with IR lights.

3 Options

Windshield Ceramic Coating

There is simply no other company in the area that takes the time to cover all the surfaces with precision accuracy. We are confident that with our professional application methods, we will get it done right the first time. Colorado Custom Auto Detailing is your best choice for windshield ceramic coatings. Windshield Ceramic coating formula Durability is determined in relation to the number of layers that are applied. Notes Gyeon can last up to 12 months while providing a long-lasting protective barrier for your windshield. This is an amazing product as it provides great self-cleaning properties! Improved Visibility When you’re driving in a downpour, you need to maintain visibility so you can stay focused on the road. Your wipers will help shed water to some extent, but in order to ensure maximum visibility, a ceramic coating is really your best bet. The hydrophobic nanostructure stops rainwater from clinging to your windshield, causing it to slide away more readily than with just your wipers. But it’s not just rain windshield ceramic coatings keep at bay. Let’s say you’re driving in the aftermath of a torrential rainstorm, and you accidentally speed right through a deep puddle of mud. Normally this mud would kick up and splatter on to your windshield, leaving you with an obscuring stain. But with ceramic coating installed, that mud will slide right off instead of clinging to the surface. Beyond mud, ceramic coating contaminant repellent also applies to bird droppings, insect remains plant matter or just about any view-obscuring gunk you can think of. Safe to say, a ceramic coating on your windshield is a must-have if you want to make driving a safer and easier endeavor. Easier Cleaning Cleaning your car’s glass can be a bit of a pain, especially if you’ve got contaminants dried on the surface. But when you’ve got a hydrophobic ceramic coating like windshield ceramic coating installed, those contaminants will simply rest on top of the coating rather than encrusting onto the surface. From there, a simple rinse should be enough to wash them away. How does that work? Well, because water is repelled from the surface, it takes contaminant particles along with it as it slides away. Having a hydrophobic windshield makes it so much easier to keep your windshield clear of gunk, for both visibility and aesthetics’ sake.

$225.00 · 7 hours

Window Tint

6 Options

Specialty Clear Bra Services

3 Options

Specialty Window Tint Services

2 Options

Interior

* Full interior deep shampoo & steam cleaning. Top to bottom - Front to back. * All floor matts. * This will include vacuuming of trunk. PLEASE REMOVE ALL PERSONAL ITEMS EXCESSIVELY DIRTY VEHICLE - will be subject to additional fees. $125.00 to $200.00 Dog Hair Pet Staining and Heavy Staining will be at additional cost. $100.00 to $250.00 THIS PROCESS WILL TAKE 48 HOURS

8 hours

Gift Card

Please contact us as the gift card can be loaded with any amount you would like. These are Real Gift Cards we can send them out to you or you can pick them up from our office. Or we can send them to an address you provide us with.

30 minutes

BLACK FRIDAY DEALS! $200.00

BLACK FRIDAY DEAL! - Is for a full complete interior shampoo and detailing. The vehicle will also receive a full exterior hand wash, clay bar & wax. All windows cleaned inside & out, Door jams cleaned, And tires dressed. Pet Hair add an additional - $125.00 Full size SUV & Trucks add an Additional - $100.00 This process will take 48 to 72 hours to complete

3 Options

After-Cleaning / Biohazard / Theft Recovery / Drug Test

We hear a lot about meth contamination in homes, businesses, and hotels. Additionally, making and smoking meth inside a vehicle is quite common. Often enough, an unsuspecting buyer is left to clean up the mess. To clean the toxic chemicals associated with meth all of the porous surfaces of the car. The car must be stripped and in many cases, parts will need to be replaced. *Smoke evacuators contain a suction unit (vacuum pump), filter, hose, and an inlet nozzle. ... The various filters and absorbers used in smoke evacuators require monitoring and replacement on a regular basis and are considered a possible biohazard requiring proper disposal. *8.1 Types of Biohazardous Waste Biohazardous waste includes the following materials: Human blood and blood products: All human blood, blood products (such as serum, plasma, and other blood components) in liquid or semi-liquid form. Items contaminated with blood that, if compressed, would release blood in a liquid or semi-liquid form, or items caked with dried blood capable of being released during handling. Other body fluids or tissues containing visible blood. Human Body Fluids: Human body fluids in a liquid or semi-liquid state, including: semen, vaginal secretions, cerebral spinal fluid, synovial fluid, pleural fluid, pericardial fluid, peritoneal fluid, amniotic fluid, and saliva from dental procedures. Also includes any other human body fluids visibly contaminated with blood, and all body fluids in situations where it is difficult or impossible to differentiate between body fluids. Microbiological Wastes: Laboratory wastes containing or contaminated with concentrated forms of infectious agents. Such waste includes discarded specimen cultures, stocks of etiologic agents, discarded live and attenuated viruses, blood or body fluids known to contain infectious pathogens, wastes from the production of biologicals and serums, disposable culture dishes, and devices used to transfer, inoculate and mix cultures (BSL-1 through BSL-4 etiologic agents as designated by NIH Guidelines/BSC). Pathological waste: All human tissues, organs, and body parts, including waste biopsy materials, tissues, and anatomical parts from surgery, procedures, or autopsy. Any unfixed human tissue, except skin. Animal waste: All animal carcasses, body parts, and any bedding material from animals known to be infected with, or that have been inoculated with human pathogenic microorganisms infectious to humans. Sharps waste: As defined in Section 9, Sharps Waste. The wastes above must be treated, packaged, labeled, and transported as described in the following sections. Sharps waste procedures are described in Section 9, Sharps Waste. Recombinant DNA and RNA: As defined in the NIH Guidelines. These wastes must be treated, packaged, labeled, and transported as described in the following sections or as determined appropriate on the EMUA and approved by the Institutional Biosafety Committee. Note: If your waste also contains radioactive material or hazardous chemicals, see Section 10, Mixed Hazardous Waste. 8.2 Responsibilities of Biohazardous Waste Generators Laboratories that generate biohazardous waste are responsible for: Ensuring that the waste is either correctly treated and disposed of within the lab, or is properly packaged and transported to the appropriate treatment facility within the Center; Packaging the waste as directed to prevent exposure or injury (needle sticks, cuts) to anyone handling the waste; and Labeling the waste with the generator's name and the room number of the lab where the waste was generated.

500.00 $500 · 30 minutes

Biohazard / Theft Recovery Detail ( Flat Fee )

We hear a lot about meth contamination in homes, businesses, and hotels. Additionally, making and smoking meth inside a vehicle is quite common. Often enough, an unsuspecting buyer is left to clean up the mess. To clean the toxic chemicals associated with meth all of the porous surfaces of the car. The car must be stripped and in many cases, parts will need to be replaced. *Smoke evacuators contain a suction unit (vacuum pump), filter, hose, and an inlet nozzle. ... The various filters and absorbers used in smoke evacuators require monitoring and replacement on a regular basis and are considered a possible biohazard requiring proper disposal. *8.1 Types of Biohazardous Waste Biohazardous waste includes the following materials: Human blood and blood products: All human blood, blood products (such as serum, plasma, and other blood components) in liquid or semi-liquid form. Items contaminated with blood that, if compressed, would release blood in a liquid or semi-liquid form, or items caked with dried blood capable of being released during handling. Other body fluids or tissues containing visible blood. Human Body Fluids: Human body fluids in a liquid or semi-liquid state, including: semen, vaginal secretions, cerebral spinal fluid, synovial fluid, pleural fluid, pericardial fluid, peritoneal fluid, amniotic fluid, and saliva from dental procedures. Also includes any other human body fluids visibly contaminated with blood, and all body fluids in situations where it is difficult or impossible to differentiate between body fluids. Microbiological Wastes: Laboratory wastes containing or contaminated with concentrated forms of infectious agents. Such waste includes discarded specimen cultures, stocks of etiologic agents, discarded live and attenuated viruses, blood or body fluids known to contain infectious pathogens, wastes from the production of biologicals and serums, disposable culture dishes, and devices used to transfer, inoculate and mix cultures (BSL-1 through BSL-4 etiologic agents as designated by NIH Guidelines/BSC). Pathological waste: All human tissues, organs, and body parts, including waste biopsy materials, tissues, and anatomical parts from surgery, procedures, or autopsy. Any unfixed human tissue, except skin. Animal waste: All animal carcasses, body parts, and any bedding material from animals known to be infected with, or that have been inoculated with human pathogenic microorganisms infectious to humans. Sharps waste: As defined in Section 9, Sharps Waste. The wastes above must be treated, packaged, labeled, and transported as described in the following sections. Sharps waste procedures are described in Section 9, Sharps Waste. Recombinant DNA and RNA: As defined in the NIH Guidelines. These wastes must be treated, packaged, labeled, and transported as described in the following sections or as determined appropriate on the EMUA and approved by the Institutional Biosafety Committee. Note: If your waste also contains radioactive material or hazardous chemicals, see Section 10, Mixed Hazardous Waste. 8.2 Responsibilities of Biohazardous Waste Generators Laboratories that generate biohazardous waste are responsible for: Ensuring that the waste is either correctly treated and disposed of within the lab, or is properly packaged and transported to the appropriate treatment facility within the Center; Packaging the waste as directed to prevent exposure or injury (needle sticks, cuts) to anyone handling the waste; and Labeling the waste with the generator's name and the room number of the lab where the waste was generated. * THIS PROCESS CAN TAKE UP TO 7 TO 10 DAYS*

$2,000 · 7 hours

Complete Detail

Full Interior & Exterior Detail THIS PROCESS CAN TAKE UP TO 2 - 3 FULL DAYS * Based on the condition of your vehicle * * Is for a full complete interior shampoo and detailing. The vehicle will also receive a full exterior hand wash, clay bar & wax. * All windows cleaned inside & out, Door jams cleaned, And tires dressed. * Motor will be steam cleaned. * Full exterior 2 stage ( Cut & Polish ). * Paint Sealant. Pet Hair add an additional $125.00 Full size SUV & Trucks add an Additional $100.00

4 Options

Initial / Theft Recovery / Drug Test / Biohazard

We hear a lot about meth contamination in homes, businesses, and hotels. Additionally, making and smoking meth inside a vehicle is quite common. Often enough, an unsuspecting buyer is left to clean up the mess. To clean the toxic chemicals associated with meth all of the porous surfaces of the car. The car must be stripped and in many cases, parts will need to be replaced. *Smoke evacuators contain a suction unit (vacuum pump), filter, hose, and an inlet nozzle. ... The various filters and absorbers used in smoke evacuators require monitoring and replacement on a regular basis and are considered a possible biohazard requiring proper disposal. *8.1 Types of Biohazardous Waste Biohazardous waste includes the following materials: Human blood and blood products: All human blood, blood products (such as serum, plasma, and other blood components) in liquid or semi-liquid form. Items contaminated with blood that, if compressed, would release blood in a liquid or semi-liquid form, or items caked with dried blood capable of being released during handling. Other body fluids or tissues containing visible blood. Human Body Fluids: Human body fluids in a liquid or semi-liquid state, including: semen, vaginal secretions, cerebral spinal fluid, synovial fluid, pleural fluid, pericardial fluid, peritoneal fluid, amniotic fluid, and saliva from dental procedures. Also includes any other human body fluids visibly contaminated with blood, and all body fluids in situations where it is difficult or impossible to differentiate between body fluids. Microbiological Wastes: Laboratory wastes containing or contaminated with concentrated forms of infectious agents. Such waste includes discarded specimen cultures, stocks of etiologic agents, discarded live and attenuated viruses, blood or body fluids known to contain infectious pathogens, wastes from the production of biologicals and serums, disposable culture dishes, and devices used to transfer, inoculate and mix cultures (BSL-1 through BSL-4 etiologic agents as designated by NIH Guidelines/BSC). Pathological waste: All human tissues, organs, and body parts, including waste biopsy materials, tissues, and anatomical parts from surgery, procedures, or autopsy. Any unfixed human tissue, except skin. Animal waste: All animal carcasses, body parts, and any bedding material from animals known to be infected with, or that have been inoculated with human pathogenic microorganisms infectious to humans. Sharps waste: As defined in Section 9, Sharps Waste. The wastes above must be treated, packaged, labeled, and transported as described in the following sections. Sharps waste procedures are described in Section 9, Sharps Waste. Recombinant DNA and RNA: As defined in the NIH Guidelines. These wastes must be treated, packaged, labeled, and transported as described in the following sections or as determined appropriate on the EMUA and approved by the Institutional Biosafety Committee. Note: If your waste also contains radioactive material or hazardous chemicals, see Section 10, Mixed Hazardous Waste. 8.2 Responsibilities of Biohazardous Waste Generators Laboratories that generate biohazardous waste are responsible for: Ensuring that the waste is either correctly treated and disposed of within the lab, or is properly packaged and transported to the appropriate treatment facility within the Center; Packaging the waste as directed to prevent exposure or injury (needle sticks, cuts) to anyone handling the waste; and Labeling the waste with the generator's name and the room number of the lab where the waste was generated.

$500 · 1 hour

12" Hood/Fenders/Mirrors

12" Hood/Fenders/Mirrors = $225.00

$225.00 $225 · 8 hours

18" Hood/Fenders/Mirrors

18" Hood/Fenders/Mirrors

$299.00 $299 · 8 hours

24" Hood/Fenders/Mirrors

$399.00 $399 · 8 hours

Full Hood / Full Fenders / Front Bumper

Full Hood/ Full Fenders / Front Bumper

$2400.00 $2,400 · 8 hours

24" Front Bumper

Bumper Only

$499.00 $499 · 8 hours

36" Front Bumper

Bumper Only

$699.00 $699 · 4 hours

40" Front Bumper

Bumper Only

$799.00 $799 · 4 hours

R

Robert Yarbrough