Indoor Environmental Testing Inc

(Change Location)

SCROLL DOWN FOR A LIST OF SERVICES AND PRICING INFORMATION.
Air Quality, Mold and EMF assessments include scientific instrument readings along with accredited laboratory testing.
Sun
Closed
Mon
9:00 AM - 4:00 PM
Tue
9:00 AM - 4:00 PM
Wed
9:00 AM - 4:00 PM
Thu
9:00 AM - 4:00 PM
Fri
9:00 AM - 4:00 PM
Sat
Closed

Open today until 4:00 PM

Our Services

INSTANT MOLD SCAN (Available after July 15)
This service provides instant mold counts of each room using a highly advanced system called Instascope developed by the University of Colorado. This technology provides an instant calculation of airborne mold counts and is able to provide mold counts for air, carpeting, inside wall cavities, under sinks and vanities, mattresses and pillows, furnace and air conditioning units, to name a few.
Post Remediation Verification & Testing (PRV)
This service is for clients who have completed mold remediation and wish to verify that mold counts are back to acceptable and safe levels. This includes a visual check, moisture meter measurements and lab testing for fungal mass on surfaces and in the air.
Mold Check: Attic Only
This service is recommended when mold is discovered in an attic and you will need a remediation protocol for mold mitigation. Includes inspection and documentation of mold issues. Does not include lab testing which is not necessary except for medical reasons. While your technician may give opinions regarding the cause or source of mold, we recommend hiring an attic specialist for any diagnosis of attic moisture/dampness.
Mold Check: Testing House/Condo 2000 sq ft
Mold inspection for all levels of a home up to 2000 sq. ft. Assess for mold contamination using visual inspection, infrared thermal imaging and instrument moisture mapping. Collect air and/or surfaces samples for analysis by an accredited lab, via Instascope and/or Mycometer.
Mold Check - Testing Basement Only Homes larger than 2000 sq ft
Assess Basement for mold contamination using visual inspection, infrared thermal imaging and instrument moisture mapping. Collect air and/or surfaces samples for lab analysis. Includes up to 6 lab samples. Additional labs are $58 each.
Mold Check: Testing Basement Only
Assess Basement for mold contamination using visual inspection, infrared thermal imaging and instrument moisture mapping. Collect air and/or surfaces samples for lab analysis. Includes up to 6 lab samples. Additional labs are $58 each.
Mold Check: Testing House/Condo 3,000 sqft or less
Mold inspection for all levels of a home up to 3000 sq. ft. Assess for mold contamination using visual inspection, infrared thermal imaging, and instrument moisture mapping. Includes QPCR testing (Mold DNA testing). Collect air and/or surfaces samples for analysis by an accredited lab, via Instascope. Mycometer. and/or Spore Traps.
Mold Check: Testing House/Condo 4,000 sq. ft. or less
Mold inspection for all levels of a home up to 4000 sq. ft. Assess for mold contamination using visual inspection, infrared thermal imaging and instrument moisture mapping. Includes QPCR testing (MOLD DNA TESTING). Collect air and/or surfaces samples for analysis by an accredited lab, via Instascope, Mycometer and/or spore traps.
Mold Check: Testing House/Condo 5,000 sq. ft or less
Mold inspection for all levels of a home up to 5000 sq. ft. Assess for mold contamination using visual inspection, infrared thermal imaging and instrument moisture mapping. Includes QPCR testing (MOLD DNA TESTING). Collect air and/or surfaces samples for analysis by an accredited lab, via Instascope, Mycometer and/or spore traps.
Mold Check: Testing One Room Only
Assess one room for mold contamination using visual inspection, infrared thermal imaging and instrument moisture mapping. Collect air and/or surfaces samples for lab analysis. Lab fees are included. Fee is for Madison only. Out of the area add $48.
Mold Check: Commercial Bldg Lab
Include visual assessment, infrared thermal imaging and moisture mapping. Mold DNA testing. Room check with Instascope, Mycometer and/or Spore Traps. Lab fees additional.
Air Quality Check - House/Condo - 2000 sq. ft or less
Includes Mold Testing (we may test any of the following, depending on visual inspection and instrument readings: air, carpeting, bedding/mattress, under kitchen sink, furniture surfaces, furnace ducts, supply vents, A/C coil, under bathroom vanity, under bath tub, wall or ceiling cavities, vacuum cleaner dust, furnace filter). Also includes analysis of household dust for allergens and irritants, gas leak check (fireplaces, stove, water heater/, furnace, clothes dryer), carbon monoxide check, carbon dioxide measurements to establish ventilation rate, formaldehyde measurement, furnace and air conditioning check (this is NOT a mechanical inspection, only air quality related items are checked), heating ducts check, vacuum cleaner leakage test, thermal infrared imaging scan of walls and ceilings, and cursory EMF check if there is an interest).
Air Quality Check - House/Condo - 3,000 sq ft or less
3,000 square feet or less. Includes Mold Testing (we may test any of the following, depending on visual inspection and instrument readings: air, carpeting, bedding/mattress, under kitchen sink, furniture surfaces, furnace ducts, supply vents, A/C coil, under bathroom vanity, wall or ceiling cavities, vacuum cleaner dust, furnace filter). Also includes analysis of household dust for allergens and irritants, gas leak check (fireplaces, stove, water heater/, furnace, clothes dryer), carbon monoxide check, carbon dioxide measurements to establish ventilation rate, formaldehyde measurement, furnace and air conditioning check (this is NOT a mechanical inspection, only air quality related items are checked), heating ducts check, vacuum cleaner leakage test, thermal infrared imaging scan of walls and ceilings, and EMF check).
Air Quality Check - House/Condo - 4000sq. ft. or less
4,000 square feet or less. Includes Mold Testing (we may test any of the following, depending on visual inspection and instrument readings: air, carpeting, bedding/mattress, under kitchen sink, furniture surfaces, furnace ducts, supply vents, A/C coil, under bathroom vanity, wall or ceiling cavities, vacuum cleaner dust, furnace filter). Also includes analysis of household dust for allergens and irritants, gas leak check (fireplaces, stove, water heater/, furnace, clothes dryer), carbon monoxide check, carbon dioxide measurements to establish ventilation rate, formaldehyde measurement, furnace and air conditioning check (this is NOT a mechanical inspection, only air quality related items are checked), heating ducts check, vacuum cleaner leakage test, thermal infrared imaging scan of walls and ceilings, and a cursory EMF check).
Air Quality Check - House/Condo - 5000 sq. ft or less
5,000 square feet or less. Includes Mold Testing (we may test any of the following, depending on visual inspection and instrument readings: air, carpeting, bedding/mattress, under kitchen sink, furniture surfaces, furnace ducts, supply vents, A/C coil, under bathroom vanity, wall or ceiling cavities, furnace filter). Also includes analysis of household dust for allergens and irritants, gas leak check (fireplaces, stove, water heater/, furnace, clothes dryer), carbon monoxide check, carbon dioxide measurements to establish ventilation rate, formaldehyde measurement, furnace and air conditioning check (this is NOT a mechanical inspection, only air quality related items are checked), heating ducts check, vacuum cleaner leakage test, thermal infrared imaging scan of walls and ceilings, and EMF check).
Air Quality Check - One Room only
Assess air quality and collect air quality parameters with scientific instrumentation in one room or office. Includes infrared camera scanning, moisture mapping, mold testing, Formaldehyde measurement, VOC testing and EMF exposure check. Lab fees included.
Air Quality Check Commercial
Up to 5,000 sq ft. Includes check for Formaldehyde, Volatile Organic Compounds, Gases, Carbon Dioxide, Mold DNA testing, other air quality parameters and full report. Lab testing additional.
Phone Inquiry/Consult - 30 Minutes
To discuss your personal situation and determine what type of testing is indicated. A $30 credit will be issued toward any services or lab testing.
Phone Consult - 45 Minutes
Phone Consultation with Martine Davis, BBEC, Certified Building Biologist. Ideal to review test results from other providers or to discuss a home/office issue.
Phone Consult - 60 Minutes
Phone Consultation with Martine Davis, BBEC, Certified Building Biologist. Ideal for clients out of the service area. Many environmental issues can be solved over the phone.
Mold DNA Test
This test provides information about the 15 most common mold species found in water damaged buildings. This test uses DNA testing (the same technology used for ERMI testing) to identify molds in household dust. A dust sample is collected and sent to the lab. Results are known in 7 to 10 business days. You can collect the dust from your home or a technician can collect for you (additional fee).
Mold Mycotoxins Test
Laboratory test which uses ELISA technology to identify mold mycotoxins in household dust. Especially important for Lyme patients and individuals who have a genetic marker preventing them from properly processing mold toxins. Includes shipping and a 20 mn phone consult to discuss the results.
Formaldehyde (Air): Immediate Instrument Reading
This test collects air in specific areas with a Formaldehyde meter. The meter will report the Formaldehyde level real-time for each area. Good for checking individual rooms, whole house, apartment, new car interior, etc.
Formaldehyde (Surface)
This type of testing allows the homeowner to determine which surface is emitting formaldehyde. If formaldehyde air levels were found elevated, this can pinpoint the exact surface(s) causing the emissions. Good to check laminate flooring, new furniture, newly painted areas, new carpeting, kitchen cabinets, recently varnished items, draperies, new contruction materials, etc. Price is for 10 surfaces.
Formaldehyde (Air) Lab Test
For this test, an air sample is collected into an adsorbing tube and submitted to a chemistry lab for analysis via Gas Chromatography. The lab provides a report with the level of formaldehyde contained in the air sample. Turn around time is approx. 5 business days. Include shipping charges to the lab and a brief phone consult to discuss your results.
EMF assessment residential - First hour
Checks for Electric & Magnetic fields, Stray Voltage (Dirty Electricity), RF (Radio Frequencies or Microwave Radiation) from cell towers, routers and other wireless appliances. current on water pipes and body voltage.
EMF Assessment Residential - Second Hour
Additional time for EMF instrumentation readings
EMF Assessment Commercial
Assess EMF exposure to building occupants in various locations. Measurements of Electric fields, Magnetic fields, Radio Frequencies, and Stray Voltage. Includes up to 2 hours. Additional hour $150.
NEW! SAFE and SOUND Premium RF Meter
Safe Living Technologies Safe and Sound Premium RF Detector 200MHz - 8GHz - Great for detecting WiFi, Cell Towers, Smart Meters, etc. - 2 Year Warranty and FREE SHIPPING!
ERMI Testing
ERMI is a mold DNA test used by mold-literate physicians to establish guidelines for patients occupancy of a residence or work place.
MOLD DNA TEST - CAP 4
Includes regular shipping. Overnight shipping add $34.
MOLD DNA - CAP 8
Includes regular shipping to the lab. Overnight shipping add $34.
MOLD DNA - CAP 14
Includes regular shipping. Overnight shipping add $34.
FUNGAL CULTURE

Our Staff

Dave in Madison, WI
Dave has been conducting mold investigations for 8 years. His training and experience also include chemical testing (VOCs and Formaldehyde) and allergen testing. Dave is a certified Mycometer Analyst and a Certified Instascope Technician.
Erik in Madison WI
Erik is passionate about houses and home maintenance. He has inspected hundreds of homes and conducted odor investigations, mold inspections, and mold testing. Erik is a Certified Instascope Technician.
Martine Davis
Martine has been a Certified Building Biologist (BBEC) since 2000. She has inspected over 4,000 homes and buildings. She specializes in health factors.